Northside: Preventing Annular Flow After Cementing in Offshore Gulf of Mexico: …One Pulse At A Time

Annular flow related to cementing surface casing has been identified as one of the most frequent cases of loss of well control incidents in the Gulf of Mexico (GoM).  Past studies have indicated the root cause of this early gas migration is due to loss of hydrostatic pressure during the cement setting process.  Cement pulsation utilizes low amplitude pulses applied to the annulus immediately following the cementing operation, which acts to shear the gel strength and retain the hydrostatic pressure of the cement column during the transition period.  Pulsation continues until the cement has developed sufficient strength to resist fluid influx, usually 4-6 hrs.  The compressible volume of the cement column (water volume required to pressurize the annulus as the cement pulse is applied) is monitored during the cement pulsation process.  Real-time monitoring of compressible volume changes during the operation can provide for surface monitoring of the downhole cement setting process. 
 
The initial offshore GoM cement pulsation application for prevention of annular flow after cementing was performed in 2004.  This presentation will describe the cement pulsation technique and review results of the recent offshore field applications.
Please register early online in order to facilitate the Northside study group to better plan and streamline the luncheon. Walk-ins will be accepted on a space available basis. Please arrive early, walk-ins are seated on a first come/first serve basis. Thank You

Location: Greenspoint Club
16925 Northchase
Houston , TX

Date: June 14, 2005, 11:30 a.m. - June 14, 2005, 1 p.m.